51 21 330 Removing and installing/replacing window cavity cover strip on inner front door

Beginning from rear, raise clips (1) with special tool 00 9 321 (folding leg).

Press cover strip (2) upwards out of clips.

Fig 1: Removing Cover Strip From Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover strip (1) past window frame towards rear.

Fig 2: Removing Cover Strip From Window

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, remove faulty clips (1) from inner door panel (2) and replace.

Fig 3: Identifying Faulty Door Panel Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Coat cover strip with rubber protection coating agent.

Begin with assembly at front (1).

Fig 4: Removing And Installing Left Or Right Front Door Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.