Post Mode

The Post-mode is adopted in order to compensate any inclination or to adjust the ride height after driving and between the Pre-mode and Sleep mode.

The Post-mode is limited in time to 1 minute. The Post-mode is only executed if the engine has been running before the system switches into this mode. If the engine has not been previously running, the system switches directly from Pre-mode into Sleep mode.

The control operation is performed in a narrow tolerance band of +/- 6mm and is terminated at +/- 4mm. The fast signal filter is used.

In the event of an inclination (Kerb Mode), the control operation takes place for the nominal heights applicable in this situation.