61 67 083 Removing And Installing/Replacing Left Or Right High-Pressure Nozzle Of Headlight Washer System (From 03/2005)
NOTE:
For Special Tool identification, see FUEL SYSTEM - SPECIAL TOOLS .
Special Tools Required:
- 13 3 010
Necessary Preliminary Tasks:
- Remove front bumper trim. Refer to 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .
To prevent excess escape of washer fluid, seal off end of high-pressure line with special tool 13 3 010.
Unlock high-pressure line (2) and detach from high-pressure nozzle (1).
Release screws (3).
Remove high-pressure nozzle (1).
Installation:
New spray nozzles are already preset.
Check function.