61 31 203 Replacing Switch Combination For Seat Adjustment
NOTE:
For Special Tool identification, see MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
Special Tools Required:
- 00 9 341
Remove and install center armrest (front). Refer to 51 16 195 REMOVING AND INSTALLING CENTER ARMREST (FRONT) .
CAUTION:
Set down center armrest on a suitable surface.
Release screws (1).
Lever out front center armrest trim (2) with special tool 00 9 341 and remove and direction of arrow.
Disconnect plug connections (1).
Release screws (1).
Feed out switch combination for seat adjustment (2) in direction of arrow.
Installation:
Make sure guides (1) are correctly seated in mountings (2).