64 11 377 Removing And Installing (Replacing) Control Panel For Heater - A/C System

Necessary Preliminary Tasks: 

• Remove and install right trim on instrument panel. Refer to 51 45 263 REMOVING AND INSTALLING/REPLACING INSTRUMENT PANEL TRIM ON RIGHT .
• Remove and install center trim on instrument panel. Refer to 51 45... REMOVING AND INSTALLING/REPLACING CENTER INSTRUMENT PANEL TRIM .

Lever out clips (1).

Pull out control panel for heater - A/C system (2) in direction of arrow.

Disconnect plug connections behind and remove control panel for heater - A/C system (2).

Fig 1: Removing Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out coding/programming.

Observe following IDC specifications:

• Programming.
• Coding.
• Car & Key Memory.
• CD "CIP".
  Fig 2: Identifying Programming Unit (DIS)

  Courtesy of BMW OF NORTH AMERICA, INC.