LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2003 >> 760Li >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair Instructions >> Rear Door Locks, Handles, Fittings >> 51 22 302 Removing And Installing/Replacing Chrome Strip For Window Cavity Cover Strip, Rear Left Or Right

51 22 302 Removing And Installing/Replacing Chrome Strip For Window Cavity Cover Strip, Rear Left Or Right

NOTE:

For Special Tool identification, see MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Special Tools Required: 

Stick adhesive tape (2) below window cavity cover strip (1) (risk of damage).

Using special tool 00 9 311 (starting at front and proceeding to rear), lever out window cavity cover strip (1).

Installation: 

Moisten window cavity cover strip (1) with water.

Window cavity cover strip (1) must be flush at front and rear with door edge.

Fig 1: Removing Window Cavity Cover Strip Using Special Tool
G03293086Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Seal (1) must be correctly fitted in chrome strip (2).

Initialize power window. Refer to 67 62... NOTES ON INITIALIZING POWER WINDOW .

Fig 2: View Of Seal In Chrome Strip
G03293087Courtesy of BMW OF NORTH AMERICA, INC.