LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2003 >> 760Li >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair Instructions >> Front Door Locks, Handles, Fittings >> 51 21 302 Removing And Installing/Replacing Chrome Strip For Window Cavity Cover Strip (On Outside Of Front Door)

51 21 302 Removing And Installing/Replacing Chrome Strip For Window Cavity Cover Strip (On Outside Of Front Door)

NOTE:

For Special Tool identification, see MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Special Tools Required: 

Attach adhesive tape (1) below window cavity cover strip (2) (risk of damage).

Fig 1: Identifying Adhesive Tape Application Area On Door
G03293054Courtesy of BMW OF NORTH AMERICA, INC.

Using special tool 00 9 311 beginning at rear (1) proceeding to front (2), lever out window cavity cover strip.

Fig 2: Removing Window Cavity Cover Strip Using Special Tool
G03293055Courtesy of BMW OF NORTH AMERICA, INC.

Pull window cavity cover strip (1) out of mirror (2) in direction of arrow and remove.

Installation: 

Moisten window cavity cover strip (1) with water.

Window cavity cover strip (1) must be flush at rear to door edge.

Fig 3: Removing Window Cavity Cover Strip Out Of Mirror
G03293056Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Seal (1) must be correctly fitted in chrome strip (2).

Initialize power window. Refer to 67 62... NOTES ON INITIALIZING POWER WINDOW .

Fig 4: Fitting Seal In Chrome Strip
G03293057Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals