63 25 000 Removing And Installing/Replacing Additional Stop Light

Lever out catches (1) of ventilation louver for oddments tray (2).

Fold up complete ventilation louver for oddments tray (2) in direction of arrow, disconnect plug connection underneath and remove complete ventilation louver for oddments tray (2) towards front.

Fig 1: Catches, Oddments Tray Ventilation Louver And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure ventilation louver for oddments tray is correctly fed:

• Into mounts for oddments tray (1).
• Into positions (2) of oddments tray (3).
  Fig 2: Oddments Tray, Oddments Tray Mounts And Positions

  Courtesy of BMW OF NORTH AMERICA, INC.

Unclip additional stop light (1) in direction of arrow from ventilation louver for oddments tray (2) and remove.

Installation: 

Make sure additional stop light (1) is correctly engaged in ventilation louver for oddments tray (2).

Fig 3: Additional Stop Light, Oddment Tray And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.