Travel Computer
The travel computer is used to monitor individual stages of a trip. It must be selected and activated separately in the On-Board Computer menu in the Control Display.
The travel computer displays the starting time and date, driving time, distance travelled, average fuel consumption and average speed exclusively in the Control Display.
The travel computer information cannot be displayed on the instrument cluster. The "START" button, selected using the controller activates the travel computer. If a trip is interrupted, the calculation of the average values is stopped as of terminal 15 Off (unless START or STOP are activated) and only continued when the trip is resumed.
The "STOP" button freezes the displays. Selecting "START" again resets all the displays of the travel computer; a selective reset of an individual functions is not possible in the travel computer.