Removing The Remote Control

The remote control can only be removed when the vehicle is stopped (below 1 km/h) and the engine is switched off.

If these conditions are met, then the remote control can be removed in any terminal status by pressing the remote control. When pressed, the sensor in the CAS detects a request for release.

The CAS control unit actuates the electro-mechanical removal lock. The remote control is pushed out with spring force. After releasing the removal lock, the CAS is always in the position terminal R "off."

The remote control may also be "comfort released" by pressing the start/stop button for longer than 2 seconds after shutting off the engine.