Inserting, Locking And Releasing Remote Controls In Ignition Switch: Notes

The vehicle can be started with the remote controls or with the reserve key:

1. Inserting: push the remote control into the ignition switch.
2. Pressing the remote control: the sensor detects a user request to lock the remote control in the ignition switch.
3. Identification of the transponder by the CAS.
4. Locking the remote control in the ignition switch: when the remote control is recognized as authorized, the electro-mechanical removal lock is activated.

   The remote control is mechanically fixed in place (locked). Locking of the remote control in the ignition switch is verified by a hall sensor in the CAS.

   This ensures that the vehicle can be locked with the key in the case of a system failure.

5. Terminal R "on": after the remote control is locked in the ignition switch, terminal R is automatically switched on.