Vehicle Order

The Vehicle Order (FA-Fahzeugauftrag) replaces the central coding code (ZCS) used up until now. The Vehicle Order describes the current status of a vehicle (following production and in case of a change in the vehicle equipment).

The Vehicle Order is formed for each vehicle individually from the factory assembly order. The length of the vehicle order varies depending on the amount of vehicle equipment.

During first initialization at the factory, the Vehicle Order is entered into the CAS. It is also stored redundantly in the LM (Lamp Module). If the CAS is replaced or retrofitted in the workshop, the Vehicle Order must be re-entered or added to the CAS control unit.

Content of the Vehicle Order:

• Vehicle Identification Number (full 17 digit VIN)
• Series (E65)
• Model key (Digits 4-7 of the VIN)
• Time criterion (Production date: MM/YY)
• Paint code (4 digit paint code)
• Upholstery code (4 digit code)
• Assembly Number (ZusBau: prog. part # for powertrain)
• E word (Additions to the standard series not in the SA)
• HO word (center installed options using 3 digit option codes: not used yet)
• Special-equipment codes (3 digit SA #'s, up to 100 possible entries)

The FA may be read out and printed using the E65 programming software (CIP). Any options installed at the BMW center will be able to be registered and input using the FA editor function.