51 16... Function Test Of Roller Sun Blind Of Left Or Right Rear Door

Special Tools Required: 

• 00 9 318

Requirements: 

Door window glass must be closed during the function test

Extend roller sun blind; if necessary, sliding members automatically snap into place in end position.

Function Test: 

• Retract roller sun blind (1) and block at pull rod with special tool 00 9 318 at bottom (left and right sliding members snap out).
• Extend roller sun blind (1).
• Sliding members automatically snap into "top" end position.
Fig 1: Securing Pull Rod With Assembly Wedge
Courtesy of BMW OF NORTH AMERICA, INC.
• Retract roller sun blind (1).
• Extend roller sun blind (1) and block at pull rod with special tool 00 9 318 at top (left and right sliding members snap out).
• Retract roller sun blind (1).
• Sliding members automatically snap into "bottom" end position.
• Extend and retract roller sun blind (1).
Fig 2: View Of Roller Blind
Courtesy of BMW OF NORTH AMERICA, INC.