51 21 795 Disassembling And Assembling Outside Handle For Painting

Necessary Preliminary Tasks:

Release screws (1) and remove light module (2).

IMPORTANT: For further tasks, protect optical waveguide connection against damage and contamination (masking/fabric/insulating tape).

Fig 1: Removing Light Module

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seals (2) on light module (1) must not be damaged or missing.

Fig 2: Identifying Seals On Light Module

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Release clamping pins (2 and 5).

Specification With Comfort Access/CA:

Remove cable strap (3).

Note down plug coding of plug (4).

Disconnect cable (4) from plug.

Fig 3: View Of Clamping Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Remove outside handle from handle carrier (1).

Remove seals (2) from handle carrier (1).

Fig 4: Locating Seals From Handle Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Specification With Comfort Access/CA:

Release screws (1).

Remove handle cover (2) from outside handle (3).

Fig 5: View Of Handle Cover From Outside Handle

Courtesy of BMW OF NORTH AMERICA, INC.