51 16 400 Removing and installing or replacing roller sun blind at fixed side window of left or right rear door

Necessary preliminary tasks:

Pull out pull plate (1) from roller sun blind slightly.

Fig 1: Removing Mounting Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Press pin (2) and remove mounting plate (3).

Release screws (1).

Fig 2: Removing Roller Sun Blind At Top

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out roller sun blind (2) at top (A) and pull out in direction of arrow (B).

Installation:

The small roller sun blind also acts as the rear guide rail of the large roller sun blind (3).

Therefore insert small roller sun blind correctly in guide (1) and brush cable (2) of large roller sun blind (3).

Fig 3: Installing Small Roller Sun Blind

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts on roller sun blind (3) must not be damaged or missing:

Fig 4: Identifying Rubber Mount And Pull Plate

Courtesy of BMW OF NORTH AMERICA, INC.