51 11 156 Removing and installing front bumper trim
Necessary preliminary tasks:
- Remove baseplate for number/license plate, refer to 51 11 158 Replacing baseplate for license plate
Build date up to 03/2005:
- Remove both fog lamps, refer to 63 17 060 REMOVING AND INSTALLING (REPLACING) LEFT OR RIGHT FOG LAMP
Build date from 03/2005:
- Remove both side grilles
Release screws (1) or clip (1) on left/right.
Release screws (1).
IMPORTANT:
Bumper trim must not be pulled out sideways (risk of damage).
Remove bumper trim straight towards front with aid of a 2nd person.
If necessary, disconnect additional plug-in contacts and feed out cable.
Installation:
Observe gap dimensions.