LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2003 >> 745Li >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> DISC - 745i, 745Li, 760i & 760Li >> Testing >> Parking Brake

Parking Brake

NOTE: Parking brake test must be carried out on roller dynamometer.
  1. Release position (engine off/ignition on). Wheel circumferential force at right and left should be at least 67 lb. force (300 N).
  2. Press parking brake button (engine off/ignition on). Vehicle must be pulled uniformly out of brake roller or drive of brake roller is deactivated on both sides.
scientia non olet · About LEMON Manuals