LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2003 >> 745Li >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> DISC - 745i, 745Li, 760i & 760Li >> Bleeding Brake System >> Bleeding Procedures >> Flushing Brake System Completely

Flushing Brake System Completely

  1. Connect bleeder hose with container to bleed valve on rear right brake caliper.
  2. Open bleed valve and flush until clear, bubble-free brake fluid emerges.
  3. Close bleeder valve.
  4. Follow same procedure at rear left, front right, then front left calipers.
scientia non olet · About LEMON Manuals