LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2003 >> 745Li >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> DISC - 745i, 745Li, 760i & 760Li >> Bleeding Brake System >> Bleeding Procedures >> Bleeding Front Or Rear-Axle Brake Circuit

Bleeding Front Or Rear-Axle Brake Circuit

  1. Connect bleeder hose with container to bleed valve on right brake caliper.
  2. Open bleed valve.
  3. Run bleeding routine with BMW Diagnosis and Information System (DIS) with bleeder valve open.
  4. After running routine, press brake pedal 5 times to stop. Clear, bubble-free brake fluid must flow out.
  5. Close bleeder valve.
  6. Repeat procedure at left caliper.
scientia non olet · About LEMON Manuals