Parking Brake
NOTE:
Accurate adjustment of parking brake is only possible if parking brake Bowden cables and all moving parts move easily and function correctly.
- Release parking brake with push-button located left of steering wheel.
- Remove one wheel lug bolt on each rear wheel. Rotate wheel until threaded bore in right wheel reaches 7 o'clock and left wheel reaches 5 o'clock setting.
- Turn adjusting screw with a screwdriver until it is no longer possible to turn wheel. See Fig 1.
- Unfasten adjusting screw 10 notches.
- Install and tighten wheel lug bolt to specification. See TORQUE SPECIFICATIONS .