63 21 107 Replacing sealing frame for rear light (on center of rear lid)

Necessary preliminary tasks: 

• Remove and install rear light, refer to 63 21 186 REMOVING AND INSTALLING/REPLACING REAR LIGHT (ON CENTRE OF REAR LID) 

Detach sealing frames for rear light on left (1) and right (2) from rear light (3).

Fig 1: Detaching Sealing Frames

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure both sealing frames for rear light (1) and (2) is correctly bonded all round on rear light (3).