51 13 000 Removing and installing/replacing front grille centre section: Notes

Necessary preliminary tasks: 

• Remove retaining hook from engine hood/bonnet, refer to 51 23 160 Removing and installing/replacing arrester hook on engine hood 

Unfasten screws (1 and 2).

Remove front grille centre section (3) downwards.

Fig 1: Removing Front Grille Centre Section

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Align front grille centre section (3) to engine hood/bonnet and secure with screws (2).

Installation: 

Clips (1) must not be damaged or missing.

Fig 2: Removing Trim From Front Grille

Courtesy of BMW OF NORTH AMERICA, INC.