51 16 360 Removing and installing right glovebox (without active knee protector only)

Necessary preliminary tasks: 

• Remove trim for instrument panel, bottom right, refer to 51 45 181 Removing and installing instrument panel trim at bottom right 

Open glovebox.

Release clip (1) and detach retaining strap (2).

Release clip (1) and detach damper (2).

Close glovebox.

Release screws (1) and remove counter-supports (2).

Unlock glovebox (3) and remove.

Installation: 

Adjust glovebox (1) to instrument panel (2):

A = approx. 5 mm

B = approx. 4 mm (centre)

Check function.