51 32 420 Removing and installing/replacing trim on front door window frame, left or right

Necessary preliminary tasks:

Partially detach rubber window seal (1) at rear.

Fig 1: Locating Rubber Window Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Coat rubber window seal (1) with water before fitting.

Release screws (1).

Fig 2: Releasing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Press trim (2) towards rear and lever out sideways.

Remove trim (1) towards top.

Fig 3: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty plastic nuts (1).

Fig 4: Replacing Faulty Plastic Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check trim (1) for damage, replace if necessary.

Fig 5: Checking Trim

Courtesy of BMW OF NORTH AMERICA, INC.