Windlass With Double Coil:

For use with small windows.

• Attach windlass firmly to window so that both coils are turned away from application point of wire
  Fig 1: Attaching Windlass Firmly To Window

  Courtesy of BMW OF NORTH AMERICA, INC.
• Feed either the upper wire end into the lower coil or the lower wire end into the upper coil
• Fit reversible ratchet on coil and tension wire
• Cut through approx. 10 cm of bonding joint
• Feed other wire end into free coil so that the wires cross
  Fig 2: Feeding Other Wire End Into Free Coil

  Courtesy of BMW OF NORTH AMERICA, INC.
• Continue cutting bonding joint by alternately using the coils
• Both wires meet ahead of both coils when removal is completed
• Remove "Roll Out 2000"