64 11 749 Removing and installing/replacing heater controls (automatic air conditioner)

Remove radio or on-board monitor, refer to 65 11 030 REMOVING AND INSTALLING/REPLACING RADIO RECEIVER .

Press out controls through the radio aperture.

Fig 1: Pressing Out Heater Controls (Automatic Air Conditioner)

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off connectors.

Fig 2: Disconnecting Heater Controls Connectors (Automatic Air Conditioner)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

After replacing the heater controls, recoding is necessary.