63 17 000 Removing and installing/replacing left or right fog lamp insert (complete)

Release screws (1).

Remove trim (2) and fog lamp (3) towards front.

Fig 1: Removing Trim And Fog Lamp

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection underneath.

Installation:

Ensure guide pin (4) is correctly seated.

Installation:

Ensure both guide lugs (1) of trim (2) are correctly seated in mounts (3) of fog lamp (4).

Fig 2: Installing Both Guide Lugs Of Trim In Mounts Of Fog Lamp

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Replacement:

Adjust front fog lamps, refer to 63 10 014 ADJUSTING FOG LAMPS .