36 11 533 Removing and installing/replacing RDC wheel electronics: Notes
NOTE:
If a tire sealing fluid has been used, replace the wheel electronics.
When a tire has been removed, do not clean the rim with installed wheel electronics with high-pressure cleaning equipment.
Do not treat wheel electronics with solvents, cleaning agents etc. If dirty, wipe with a clean cloth only.
Do not clean wheel electronics with compressed air.
CAUTION:
If the wheel electronics have been removed, the complete valve must be replaced.
Remove tires,
refer to 36 12 001 CHANGING A TIRE (ON FRONT, REAR OR SPARE WHEEL) .