65 52 013 Removing and installing complete on-board monitor (widescreen)

WARNING: This page is about a different variant/trim than selected.

Unclip frame of on-board monitor (1) in direction of arrow and remove.

Fig 1: Removing Frame Of On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws (1).

Pull out complete on-board monitor (2) in direction of arrow.

Fig 2: Pulling Out On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and (2) and disconnect.

Remove complete on-board monitor.

Fig 3: Unlocking Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.