61 62 100 Adjusting jet nozzle for rear window washer unit
WARNING: This page is about a different variant/trim than selected.
NOTE:
The spray must meet the contact point (1).
Courtesy of BMW OF NORTH AMERICA, INC. SPECIFICATION
| |
Measurement A [mm] |
Measurement B [mm] |
| E53 |
100 |
450 |
IMPORTANT:
Do not insert any pointed objects in nozzle (risk of damage).
Mark contact point with crepe tape. Adjust jet nozzle with offset screwdriver (3.5 mm) in slot.
Courtesy of BMW OF NORTH AMERICA, INC.