65 52 010 Removing and installing on-board monitor

Remove center fresh air grill. Refer to 64 22 161 REMOVING AND INSTALLING/REPLACING FRESH-AIR GRILL CENTER .

Detach felt strips (1) in lower area and fold upwards.

Fig 1: View Of Felt Strips In Lower Area

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Detach rotary knob (2).

Fig 2: Detaching Rotary Knob

Courtesy of BMW OF NORTH AMERICA, INC.

Insert suitable screwdriver in aperture.

Turn screwdriver approx. 45° in direction of arrow and unlock on-board monitor.

Withdraw on-board monitor (1) and disconnect plug connections.

Fig 3: Unlocking On-Board Monitor Using Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

On-board monitor (1) must snap securely into place in lower lock.