51 16 201 Replacing center console

Remove rear center console with cup holder, refer to procedure in 51 16 204 REMOVING AND INSTALLING/REPLACING REAR CUP HOLDER .

Release left/right screws (1).

Fig 1: Releasing Left/Right Screws

Courtesy of BMW OF NORTH AMERICA, INC.

In addition, release screw (1) on driver's side.

Fig 2: Releasing Screw On Driver'S Side

Courtesy of BMW OF NORTH AMERICA, INC.

Release left/right screws (1) and remove side sections (2).

Fig 3: Releasing Left/Right Screws And Removing Side Sections

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) and all screw points (2) of side sections (3) must not be damaged.

Fig 4: Use Care Not To Damage Guides & Screw Points Of Side Sections

Courtesy of BMW OF NORTH AMERICA, INC.

Release cable holder (1).

Turn and detach plug connections (2).

Release screws (3) and remove holder (4).

Fig 5: Releasing Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten cable clip (1).

Feed cable (2) out of center console (3).

Fig 6: Removing Wiring Cable Out Of Center Console

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove armrest (2) from center console (3).

Fig 7: Removing Armrest From Center Console

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (2) and remove frame (1).

Fig 8: Removing Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Remove left/right metal nuts (3) from center console (4).