51 45 180 Removing and installing trim for instrument panel, bottom left

Release screws (1).

Disconnect plug connection for OBD socket (2).

Unclip rubber gaiter from steering wheel trim and remove trim (2).

Fig 1: Removing Bottom Left Instrument Panel Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clip rubber gaiter (1) correctly with clips (1) into fixtures (3) in steering wheel trim.

Fig 2: Clipping Rubber Gaiter Correctly With Clips Into Fixtures In Steering

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty metal nuts (1).

Rubber gaiter (2) and styrofoam (3) must not be damaged.

Fig 3: Use Care When Installing Rubber Gaiter (2) & Styrofoam

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Remove OBD socket (4) from trim (5).