13 71 Air intake silencer
WARNING: This page is about a different variant/trim than selected.
INTAKE SILENCER TIGHTENING TORQUE SPECIFICATION (1AZ - 3AZ)
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Air intake silencer on cylinder head cover |
M41 / M51 M6 |
|
|
6 N.m. |
| 2AZ Clean air pipe to hot-film air-mass flow sensor (hose clamp) |
M67 |
|
|
3 N.m. |
| 3AZ Intake hood to front wall |
E53 / M62 |
|
|
4 N.m. |