12 14 Electronic Shift Units or Control Units
WARNING: This page is about a different variant/trim than selected.
ELECTRONIC SWITCHING TIGHTENING TORQUE SPECIFICATION (1AZ - 4AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ TCI control unit | All | 2.5 N.m. | ||
| 2AZ Knock sensor | E23 | 13 N.m. | ||
| All | 20 N.m. | |||
| 3AZ Engine speed and reference mark sensor | All | M6 | Replace microencapsulated screw | 10 N.m. |
| 4AZ Cover on control unit box | All | 4.4 N.m. |