11 12 Cylinder Head with Cover M62 B 44
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD WITH COVER SPECIFICATION
| Cylinder head height Original height | mm | 140.0 |
| Machining limit | mm | 139.7 |
| Valve guides are not available as replacement parts. | ||
| Valve guide interior bore diameter (installed) | ||
| Standard | mm | 6.0 H7 |
| Size 1 | mm | 6.1 H7 |
| Size 2 | mm | 6.2 H7 |
| Max. tilt clearance (wear between valve and valve guide) | mm | 0.5 |
| Camshaft bearing | ||
| Guide bearing width (cylinder head) | mm | 21.90 -0.06 |