51 16 000 Removing and installing/replacing mirror on left or right front door

Unfasten cable clip (1).

Pull off adhesive tape (2) and expose wire (3).

Fig 1: Removing Side-View Mirror (1 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out cover (1) and release screw underneath.

Pull cover (3) to one side.

Release screw (5) and detach mirror (4) with cable (2).

Installation:

Tightening torque, refer to 51 16 1AZ in BODY EQUIPMENT - TIGHTENING TORQUES .

Fig 2: Removing Side-View Mirror (2 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install mirror base with seal (1) and sound insulation (2).

Carry out function check.

Fig 3: Installing Side-View Mirror

Courtesy of BMW OF NORTH AMERICA, INC.