51 24 120 Removing and installing/replacing left or right lock for rear lid lower section

Release screws (1) on drive (2).

Fig 1: Removing Trim For Rear Lid Lower Section

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1).

Lever out Bowden cable (2) from right lock and (3) from left lock and remove drive (4).

Fig 2: Levering Out Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip Bowden cable (1) from holders (2).

Release screws (4) and remove left or right lock (5).

Fig 3: Release Screws & Remove Left Or Right Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lay Bowden cable (1) under cable (3).

Installation:

Bowden cable (1) must engage correctly in lock (2).

Fig 4: Checking Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.