51 16 360 Removing and installing right glove box

Open glovebox.

Lever out glovebox lamp and disconnect plug connection.

Raise glovebox (1) a little and detach pin (2) from retaining strap (3).

Fig 1: Removing Glovebox Retaining Strap Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out cover from right glovebox and open fully.

Remove screws (1) and (2).

Release screws (3) and fold down glovebox (4).

Fig 2: Removing Glovebox Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, disconnect plug connection for portable lamp.

Feed cable (2) out of holder (3) and remove glovebox (4).

Fig 3: Removing Glovebox

Courtesy of BMW OF NORTH AMERICA, INC.