Version Before 09/01 Only:

Detach seal (1) from handle strip (2).

Fig 1: Detaching Seal From Handle Strip

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Do not damage trim (2) when removing catches (1).

Carefully lever panel (2) with special tool 00 9 322 (plastic wedge) out of handle strip (3) and remove.

Fig 2: Removing Lever Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and guides (2) of trim (3) must not be damaged.

Fig 3: Checking Catches And Guides Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Remove adhesive residue (1) from handle strip (2).

Installation:

Perform function check with trunk lid open.

Fig 4: Removing Adhesive Residue From Handle Strip

Courtesy of BMW OF NORTH AMERICA, INC.