51 43 070 Removing and installing/replacing side trim panel, footwell, on A-pillar, left

Remove trim panel for pedal assembly. See 51 45 185 Removing And Installing/Replacing Trim For Pedal Assembly .

Remove entrance cover strip at front (inside).

Release screw (1) and remove release lever (2).

Fig 1: Removing Release Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip running board (1) on outside from below towards top and remove towards interior.

Fig 2: Removing Towards Interior

Courtesy of BMW OF NORTH AMERICA, INC.

Detach mucket (1) in area of footwell trim (3).

Release screws (2).

Remove footwell trim (3) towards front/interior.

Fig 3: Removing Footwell Trim Towards Front/Interior

Courtesy of BMW OF NORTH AMERICA, INC.