51 12 801 Replacing bracket for rear bumper at left or right

(bumper removed)

If necessary, remove rear bumper completely. See 51 12 001 Replacing Rear Bumper .

Release screw (1) on wheel arch.

Press together catches (2) and remove holder (3) outwards/forwards.

Fig 1: Removing Holder Outwards/Forwards

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and guides (2) must not be damaged.

Fig 2: Checking Catches And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) and remove holder (2).

Fig 3: Releasing Screw And Remove Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) on holder (2) must not be damaged.

Fig 4: Checking Guides On Holder

Courtesy of BMW OF NORTH AMERICA, INC.