51 45 030 Removing and installing instrument panel trim: Installation:

Anti-drumming lining (1) must be correctly stuck on.

Foam strip (2) must be correctly stuck on.

Fig 1: Inspecting Foam Strip Must Be Correctly Stuck On

Courtesy of BMW OF NORTH AMERICA, INC.

Push fixtures (1) and (2) onto guide plates (3) and (4).

1. Fixture on instrument panel, outside
2. Fixture on instrument panel, center
3. Guide plate on body, outside
4. Guide plate on body, center
   Fig 2: Pushing Fixtures (1) And (2) On To Guide Plates

   Courtesy of BMW OF NORTH AMERICA, INC.