Removal & Installation

Carefully lever out strip (1) with special tool 00 9 318 from rear to front in direction of arrow.

Fig 1: Identifying Out Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, detach clips from bridge (1). Bridge (1) must not be damaged.

Fig 2: Detaching Clips From Bridge

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace faulty clips (2).

Attach clips (2) to strip (1).

Lock (3) must be correctly engaged in strip (1).

Fig 3: Attaching Clips To Strip

Courtesy of BMW OF NORTH AMERICA, INC.