LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2002 >> X5 30i, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair Instructions - X5 (4.4L) >> Front Door Locks, Handles, Fittings >> 51 21 300 Removing and installing/replacing window cavity cover strip on outside of front door >> Special Tools Required:

Special Tools Required:

Attach adhesive tape (1) below window cavity cover strip (2) (risk of damage).

Using special tool 00 9 311 and proceeding from rear to front, lever out window cavity cover strip (1).

Installation: 

For installation, coat window cavity seal (1) with turpentine substitute (sourcing reference: BMW Parts Service).

Window cavity cover strip (1) must be flush with door edge at front and rear.

Fig 1: Attaching Adhesive Tape Below Window Cavity Cover Strip
G03252867Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Clip (1) must not be damaged.

Fig 2: Locating Clip
G03252868Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Retainer (1) of window cavity cover strip (2) must not be damaged.

Fig 3: Checking Retainer Of Window Cavity Cover Strip
G03252869Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals