51 21 180 Removing and installing/replacing cover on outside handle: Installation:

Install new trim (1) and frame (2).

Fig 1: Installing Trim And Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Fig 2: Releasing Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Removing cover (1) on outside handle:

1. A Pull cover (1) approx. 1 ... 2 mm towards rear.
2. B Take off cover (1).
   Fig 3: Removing Cover On Outside Handle

   Courtesy of BMW OF NORTH AMERICA, INC.

Lever out catches (1) and detach cover (2) from filler element (3).

Catches (1) on cover (2) must not be damaged.

Fig 1: Checking Catches On Cover

Courtesy of BMW OF NORTH AMERICA, INC.