51 12 801 Replacing bracket for rear bumper at left or right

(Bumper Removed)

Release screw (1) on wheel arch.

Press together catches (2) and remove holder (3) outwards/forwards.

Fig 1: Locating Catches On Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and guides (2) must not be damaged.

Fig 2: Identifying Catches And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) and remove holder (2).

Fig 3: Releasing Screw And Removing Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) on holder (2) must not be damaged.

Fig 4: View Of Guides On Holder

Courtesy of BMW OF NORTH AMERICA, INC.