LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2002 >> X5 30i, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair Instructions - X5 (3.0L) >> Instrument Cluster Trim Panel >> 51 45 180 Removing and installing trim for instrument panel, bottom left

51 45 180 Removing and installing trim for instrument panel, bottom left

Remove trim for pedal assembly. Refer to 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .

Release screws (1).

Disconnect plug connection for OBD socket (2).

Unclip rubber gaiter from steering wheel trim and remove trim (2).

Fig 1: Disconnecting Plug Connection For OBD Socket
G03255998Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Clip rubber gaiter (1) correctly with clips (1) into fixtures (3) in steering wheel trim.

Fig 2: Clipping Rubber Gaiter Correctly With Clips Into Fixtures In Steering
G03255999Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace faulty metal nuts (1).

Rubber gaiter (2) and styrofoam (3) must not be damaged.

Replacement Only: 

Remove OBD socket (4) from trim (5).

Fig 3: Clipping Rubber Gaiter With Clips Into Steering Wheel Trim
G03256000Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals