LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2002 >> X5 30i, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair Instructions - X5 (3.0L) >> Front Door Locks, Handles, Fittings >> 51 21 180 Removing and installing/replacing cover on outside handle

51 21 180 Removing and installing/replacing cover on outside handle

Lever out trim (1) and frame (2).

Fig 1: Levering Out Trim And Trim Frame
G03255782Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: After releasing screw, you must reinstall frame (2) (damage to paint).

Installation: 

Install new trim (1) and frame (2).

Release screw (1).

Fig 2: Releasing Screw For Outside Handle
G03255783Courtesy of BMW OF NORTH AMERICA, INC.

Removing cover (1) on outside handle:

  1. Pull cover (1) approx. 1 - 2 mm towards rear.
  2. Take off cover (1).
Fig 3: Removing Cover On Outside Handle
G03255784Courtesy of BMW OF NORTH AMERICA, INC.

Lever out catches (1) and detach cover (2) from filler element (3).

Fig 4: Detaching Cover From Filler Element
G03255785Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Catches (1) on cover (2) must not be damaged.

scientia non olet · About LEMON Manuals