LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2002 >> X5 30i, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair Instructions - X5 (3.0L) >> Front Door Locks, Handles, Fittings >> 51 21 140 Removing and installing/replacing complete lock cylinder

51 21 140 Removing and installing/replacing complete lock cylinder

Remove plate (1).

Fig 1: Removing Plate
G03255770Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Fit new plate (1).

Release screw (1).

Fig 2: Releasing Screw
G03255771Courtesy of BMW OF NORTH AMERICA, INC.

Removing cover (1) on outside handle:

  1. Pull cover (1) approx. 1 - 2 mm towards rear.
  2. Detach cover (1) with lock barrel (2) towards outside.
Fig 3: Removing Cover On Outside Handle
G03255772Courtesy of BMW OF NORTH AMERICA, INC.

Remove catches (1) and detach cover (2) from lock cylinder (3).

Fig 4: Removing Catches And Detaching Cover From Lock Cylinder
G03255773Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Catches (1) on cover (2) must not be damaged.

Fig 5: Identifying Lock Cylinder Catches
G03255774Courtesy of BMW OF NORTH AMERICA, INC.

(3) Lock cylinder.

Installation: 

Notch (2) on paddle support (1) must be secured in catch (3).

Fig 6: Aligning Notch On Paddle Support
G03255775Courtesy of BMW OF NORTH AMERICA, INC.

Only in this position will installation of the lock barrel be guaranteed.

scientia non olet · About LEMON Manuals